Power voltage supply:DC12V/24V/220VAC
Temperature measuring range: -50 ~ 110
Temperature control range: -50 ~ 110
Display accuracy:0.1°
Temperature measurement accuracy: plus or minus 0.2 degrees
Temperature control accuracy: plus or minus 0.1 degrees
Input measurement: NTC10K probe L = 1 meter waterproof
Input power: according to the classification of choice
Output power: according to the classification of choice
Appearance size: 60 * 45 * 31 mm
Output type: relay output (output switch)
Output capacity: 10A
Press up to show start temperature button
Long press The UP button the temperature display Flashing, press the UP or DOWN button Set the beginning of the temperature value
Press Down the display button to stop temperature
Long press the Down button the temperature display Flashing, press the UP or Down button Set to stop the temperature value
Quantity: 1Pc
Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!!!

Package includes:
1Pcx 12V/24V/220 V 10A Digital Thermostat Control Switch Temperature Controller LED + Probe

Instructions:

1.Set the startup temperature:
Press ▲ key once to start the display temperature. Press and hold ▲ key for about 3 seconds to start the temperature digital flashing. Use ▲▼ key to set the desired temperature value.
2.Set the stop temperature:
Press the ▼ button to display the stop temperature. Press and hold the ▼ button for about 3 seconds to stop the temperature digital flashing. Use the ▲▼ keys to set the desired temperature value.
3.How to restore the factory settings:
When power is on, press and hold ▲▼ at the same time, the digital tube display 888 will then automatically jump to the detected temperature, that is, restore the factory settings.

220V W3001 XH-W3001 Digitálny termostat pre regulátor teploty inkubátora 110V-220V 10A Termostat pre testovanie teploty 12V